 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FUJITSU SEMICONDUCTOR DATA SHEET DS04-23505-1E ASSP CMOS FRONT-END LSI MB54501 s DESCRIPTION The Fujitsu MB54501 includes a low-noise amplifier and a mixer, which are used for front end of mobile telecommunication systems. Using Fujitsu's advanced technology, MB54501 achieves an Icc of 6.0mA (typ.). s FEATURES Amplifier * * * * * * * * Mixer Supply voltage 3V (typ.) 3V (typ.) Current consumption 3mA (typ.) 3mA (typ.) Input frequency 1.1GHz (max.) 1.1GHz (max.) *1 15dB (typ.)*2 Gain 14dB (typ.) *1 Noise figure 2.2dB (typ.) 5dB (SSB, typ.)*2 1dB compression point -1dBm (typ.)*1 Input return loss 8dB (typ.)*1 Output return loss 10dB (typ.)*1 *1: Measured by the circuit of "measurement circuit example". (fin = 878MHz) *2: Measured by the circuit of "measurement circuit example". (IF = 90MHz) * 16-pin Plastic Shrink Small Outline Package (Suffix: -PFV) s PACKAGE 16-pin Plastic SSOP (FPT-16P-M05) MB54501 s PIN ASSIGNMENT (TOP VIEW) RFout 1 16 Lext GND 2 15 RFin GND 3 14 Rext VCC 4 13 NC NC 5 12 RE GND 6 11 RE GND 7 10 GND MIXin 8 9 MIXout (FPT-16P-M05) s ABSOLUTE MAXIMUM RATINGS Parameters Supply Voltage Output Voltage Output Current Storage Temperature Symbol VCC VO IO TSTG Value -0.5 to 7.0 -0.5 to VCC + 0.5 0 to 10 -55 to +125 Unit V V mA C Note: Permanent device damage may occur if the above Absolute Maximum Ratings are exceeded. Functional operation should be restricted to the conditions as detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2 MB54501 s EQUIVALENT CIRCUIT Vcc RFout Main Bias Circuit Lext RFin Main Bias Circuit MIXout MIXin Rext RE Amplifier Mixer s PIN DESCRIPTION Pin No. Pin Name 1 2 3 4 5 6 7 8 RFout GND GND VCC NC GND GND MIXin Description Amplifier output Ground Ground Power supply No connection Ground Ground Mixer input Pin No. Pin Name 9 10 11 RE 12 13 14 15 16 NC Rext RFin Lext No connection Emitter of a transistor for amplifier Amplifier input Amplifier load connection Emitter of a transistor for mixer MIXout GND Description Mixer output Ground 3 MB54501 s RECOMMENDED OPERATING CONDITIONS Value Parameter Supply Voltage Input Voltage Operating Temperature Symbol Min. VCC VI Ta 2.7 GND -40 Typ. 3.0 - - Max. 5.5 VCC +85 V V C Unit Notes: To protect against damage by electrostatic discharge, note the following handling precautions: - Store and transport devices in conductive containers. - Use properly grounded workstations, tools, and equipment. - Turn off power before inserting or removing this device into or from a socket. - Protect leads with conductive sheet, when transporting a board mounted device. 4 MB54501 s ELECTRICAL CHARACTERISTICS AMPLIFIER (Vcc = +3.0V, Ta = 25C) Parameter Supply Voltage Supply Current Operating Frequency Gain Noise Figure 1dB Compression Point Input Return Loss Output Return Loss Symbol VCC ICC fin Gain NF P1dB RLIN RLOUT Conditions -- -- -- -- -- Output -- -- Target Value Min. 2.7 -- -- -- -- -- -- -- Typ. 3.0 3.0 878 14 2.2 -1 8 10 Max. 5.5 -- 1100 -- -- -- -- -- Unit V mA MHz dB dB dBm dB dB Remark: Electrical characteristics depend on external circuits (elements) or status of mounting. The above characteristics are measured by the test circuit in the next page. MIXER (Vcc = +3.0V, Ta = 25C) Parameter Supply Voltage Current Consumption Operating Frequency Gain Conversion Gain Noise Figure Symbol VCC ICC fin S21 GC NF Conditions -- -- -- Amplifier characteristics Mixer characteristics IF = 90MHz -- SSB Target Value Min. 2.7 -- -- -- -- -- Typ. 3.0 3.0 878 9 15 5 Max. 5.5 -- 1100 -- -- -- Unit V mA MHz dB dB dB Remark: Electrical characteristics depend on external circuits (elements) or status of mounting. The above characteristics are measured by the test circuit in the next page. 5 MB54501 s MEASUREMENT CIRCUIT (EXAMPLE) 2nH 50 Measuring apparatus 100p 1 3.9n RFout Lext 16 878MHz 100p 2 3 1 Vcc = 3V 1000p GND RFin 15 6.8n GND Rext 14 1000p 4 5 6 Vcc NC 13 12 11 10 100p Vcc = 3V 1000p 1000p NC RE GND RE RF = 878MHz SAW 3p 100p 7 8 5.6n GND GND MIXin MIXout 9 1 150n 20p 1000p 30p IF = 90MHz 50 Measuring apparatus SAW LO = 788MHz 6 MB54501 s PACKAGE DIMENSIONS 16pins, Plastic SSOP (FPT-16P-M05) * 5.000.10(.197.004) *: This dimension does not include resin protrusion. 1.25 -0.10 +.008 .049 -.004 +0.20 0.10(.004) INDEX *4.400.10 (.173.004) 6.400.20 (.252.008) 5.40(.213) NOM 0.650.12 (.0256.0047) 0.22 -0.05 +.004 .009 -.002 +0.10 "A" 0.15 -0.02 +.002 .006 -.001 +0.05 Details of "A" part 0.100.10(.004.004) (STAND OFF) 4.55(.179)REF 0 10 0.500.20 (.020.008) Dimensions in mm (inches). C 1994 FUJITSU LIMITED F16013S-2C-4 7 MB54501 FUJITSU LIMITED For further information please contact: Japan FUJITSU LIMITED Corporate Global Business Support Division Electronic Devices KAWASAKI PLANT, 4-1-1, Kamikodanaka Nakahara-ku, Kawasaki-shi Kanagawa 211-8588, Japan Tel: (044) 754-3763 Fax: (044) 754-3329 All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU sales representatives before ordering. The information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. FUJITSU semiconductor devices are intended for use in standard applications (computers, office automation and other office equipment, industrial, communications, and measurement equipment, personal or household devices, etc.). CAUTION: Customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with FUJITSU sales representatives before such use. The company will not be responsible for damages arising from such use without prior approval. Any semiconductor devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. http://www.fujitsu.co.jp/ North and South America FUJITSU MICROELECTRONICS, INC. Semiconductor Division 3545 North First Street San Jose, CA 95134-1804, USA Tel: (408) 922-9000 Fax: (408) 922-9179 Customer Response Center Mon. - Fri.: 7 am - 5 pm (PST) Tel: (800) 866-8608 Fax: (408) 922-9179 http://www.fujitsumicro.com/ Europe FUJITSU MIKROELEKTRONIK GmbH Am Siebenstein 6-10 D-63303 Dreieich-Buchschlag Germany Tel: (06103) 690-0 Fax: (06103) 690-122 http://www.fujitsu-ede.com/ Asia Pacific FUJITSU MICROELECTRONICS ASIA PTE LTD #05-08, 151 Lorong Chuan New Tech Park Singapore 556741 Tel: (65) 281-0770 Fax: (65) 281-0220 http://www.fmap.com.sg/ F9803 (c) FUJITSU LIMITED Printed in Japan 8 |
Price & Availability of MB54501
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |